It will fail on driver install at this stage thats only so we have the unit plugged in ready to be installed. Once both bolts are undone the unit should just hang down. What you need to do is remove 2 screws possibly 3 mine might have been missing 1 so check all along the trim. I did hours of reading about it from all across the internet and now i have located the correct method for achieving a key and much cheaper. Not immediately needing one and slightly knocked back i declined and was back to square one. NCS Expert BMW Coding Software Downloadīack Story. I have compiled a great excel document which explains the NCS expert coding list, and options for the E60 bmw. You will need to change one parameter in the CIC module. I have a separate laptop I can use for TeamViewer though.If you are unsure on what update is the latest for your model, please refer to the update matrix here.Īvailable now here. Yes, but the laptop I have for coding isn't set up for internet.
It certainly wants to but something is keeping it from starting that has to do with whatever I coded to it last night. That has nothing to do with it not starting. I just put new Vanos solenoids and an exhaust camshaft sensor in it. I bought a laptop that came preloaded with all the software and came with a cable but the attached tutorials were not the best. MAN and don't know how to start all over. Looks like you have 2aa1 camshaft sensor outlet, part number is I would first of all clean Vanos solenoids with carb cleaner, its very easy if it does not help you can replace that sensor. Thanks, I just cleared the codes and tried to restart. I'd be willing to pay, I certainly would rather pay someone here than take it to the stealership. What could I have possibly done? Is there anything I can post in terms of information that could help an expert identify the problem and help me get the car started. The battery has been on a charger all day while trying to recode. Had it towed home and have been trying all day to figure out what's wrong and trying to get everything back to stock but it still will not start. Remember Me? After coding I drove the car and a few miles down the road it died and would not restart.
0 kommentar(er)
